Almost all sewing projects usually start with thread threads. To make this starting step easier, use a needle large enough to do the work and trim the ends so that the fibers don’t poke out of the needle. Once the thread is passed through the needle, create a quick knot at the bottom. Then, you’re ready to sew!
Step 1: Insert a single sewing thread through a needle
1. Select a needle that can accommodate thread thickness.
Once you have selected threads for your sewing project, look at a few needles and hold the threads on the eye of the needle. The eyes should not be narrower than the thread or you will have a hard time threading.
- It also depends on the needle point. You might want a needle with sharpness so that, for example, easy piercing of fabric, or if you are sewing knitted fabric, pick the needle with a blunt head.
- Consider buying many different size needles, so you can try some until you find the right size.
did you know? The opening of the needle that inserts the thread is called the eyes.
2. Bridge at least 1 foot (30 cm) of wire and trim the ends for a clean cut.
Take apart the threads you want to use for your project and cut it off the spool. Then, use scissors to cut the tip of the thread end and you thread the thread to the needle. This will make the shear clean so that the fibers do not protrude from the end of the thread.
- Try licking the ends of the line to help the fibers stay together.
3. Insert the end of the sewing thread through the eye of the needle.
Hold the needle between the thumb and index finger while holding the end of the line with the other thumb and index finger. Then, push the end of the line away.
- Thread with threads. For example, you may find that it is easier for you to hold the end of the thread tightly when pushing the needle’s eyes onto the thread.
Variation: You can fold the end of the line into a small loop. Then, pass the small ring through the needle’s eyes.
Read also: Sewing thread, importance, type and use
4. If the needle you are using is small, try using needles.
If you are working on threading the thread through the eye of the needle, especially if the small needle is small, buy needles from the craft store. Hold the wide end of the thread and insert the curved bend through the end of the eye of the needle. Then, pass the thread through the larger eye of the thread and then pull the thread backward through the needle.
- If you are using threads that are constantly splitting while trying to threads, the needle threading machine works very well.
5. Pass the thread through the needle to form the tail.
Grab the threaded end you pass through the needle and pull it at least 2 inches (5.1 cm). This will create a tail to prevent the thread from slipping out through the needle.
- The size of the threaded tail is a personal preference, so you can work hard at any time.
Step 2: Double-wire
1. Cut at least 2 feet (61 cm) of wire.
You can use more depending on how many threads the project needs. Remember that you will fold it in half, which is why you should first pull out about twice the thread.
- For example, if you are going to get into socks, you can pull out a 3-foot (91 cm) line to work with 11⁄2 Feet (46 cm) double wire.
2. Fold the threads in half and hold the ends together.
The two threads pinched together combine between your thumb and index finger. This will fold evenly in half, so it is double-stranded.
hint: If you work in a well-lit space, it’s easier to process threads and pass them through the needle. You can sit next to the light for the best lighting.
3. Push both ends of the thread through the eye of the needle.
Imagine you thread the needle and thread as usual, but make sure both ends of the thread pass through the needle’s eyes.
Then, place both ends between the thumb and index finger and pull the thread until the needle is about 4 inches (10 cm) from the end of the loop end of the thread.
4. Pass the needle through the cycle to tighten it.
Insert the needle into the middle of the threaded ring and continue pulling the needle for cycle backwards. Pull it a little bit so that the ring tightens it into the nodule of the needle near the eye. You can then tie knots at the end of the online.
- When sewing, creating a knot near the needle will prevent it from sliding on the double-stranded wire.
Step 3: Tie the knot
1. Wrap the end of the line around your middle finger
Use your thumb to secure the loose threaded end to the appropriate middle finger. Then, wrap the threads around the middle finger to allow the threads to be fully circulated around the fingers.
- If you use double-linked wires, keep them together and wrap the two wires around your fingers.
hint: To create friction and make knotting easier, lick your thumb and middle finger or dip it in small water before wrapping the thread.
Also read: Childhood Learning and Factors Influencing Learning
2. Roll the threads 2 to 3 times to create additional layers for the knot.
Keep the line between your thumb and index finger. Then slowly roll the middle finger towards the bottom of the thumb.
- The thread should feel thicker between your fingers because you are already wrapped around yourself.
3. A scroll line sandwiched between your fingers.
Instead of letting the rolling thread slide off your fingers, press your thumb and middle finger firmly against the thread.
4. Tighten the thread to create a knot.
When you use your other hand to lengthen the thread in the opposite direction, clamp your fingers to the thread. This will form the end of the line.
change: If you want to make a more integrated knot, especially if you use thick wires, you can insert the end of the wire by wrapping around the ring around your fingers. Routine it once and pull it to form a double knot.
Also read: A comprehensive list of 5-minute crafts for adults and children
